NEWS CENTER

25

2022

-

02

What are the common problems of landscape lights?

Author:

Landscape lights are widely used in our daily life. It takes a long time to update and replace them. They are not replaced directly when they fail or are broken, but are repaired and maintained within the usable range and then used again. . So, what are the common problems with landscape lights? What is the daily maintenance method of landscape lights? Let's take a look at Jiuzheng Lighting Network below!

What are the common problems of landscape lights
1. The construction quality is poor, and the proportion of faults is large. The object of custom lighting of landscape lights is different from indoor lighting and architectural environment lighting, and its main purpose is to enhance the effect of scenery and create a night landscape. Therefore, in terms of the type of light source, the light source with better direction and control ability should be selected as far as possible, and the use of ordinary floodlighting lamps should be reduced. The main manifestations are: first, the depth of the cable trench is not enough, and the sand-covered bricks are not constructed according to the standard; second, the production and installation of the aisle pipe does not meet the requirements, and the two ends are not made into whistle according to the standard; Drag to the ground; Fourth, the foundation buried pipe is not constructed according to the standard requirements. The main reason is that the buried pipe is too thin, and with certain bends, it is difficult to use cables, resulting in dead corners at the bottom of the foundation. Fifth, the pressure of the wire head and the thickness of the insulation package are not enough, and it will be short-circuited after a long period of time.

2. Material failure, due to the failure of processing in recent years, there are also many factors for the low quality of materials. Its main properties are: the wire contains less aluminum, the wire is hard, and the insulation layer is thin. This has become more common in recent years.

3. The quality of the support project is not good, and the landscape light cable is generally laid on the green belt. The poor construction quality of the pavement and the collapse of the ground cause the deformation of the cableway and lead to the armor of the cable. Especially the northeast region is located in the alpine region. When winter comes, the cable and the soil form a whole. Once the ground subsides, it will be pulled to the bottom of the landscape light foundation, and in summer, the rain will burn at the root of the foundation.

4. The design is unreasonable. On the one hand, it is overload operation. The lighting requirements of landscape lights are quite different in different positions. In order to show the beautiful shapes of buildings, sculptures, flowers, trees, rocks and other objects in the garden, the lighting methods should be different from scene to scene, and the projection lighting should also be based on needs. Change the strength to show their own charm at night; the street lights on both sides of the garden road should have uniform and continuous illumination to meet the needs of safety. With the continuous development of urban construction, landscape lights are also expanding. When a new landscape light is built, it is usually close to the landscape light and connected to which loop. In addition, the advertising industry has developed rapidly in recent years, and the advertising load is connected with the landscape lights, which makes the load of the landscape lights too large. The cable is overheated, the wire head is overheated, the insulation is reduced, the ground is short-circuited, etc.; on the other hand, when designing the light pole, only its own situation is considered, and the space for the cable head is ignored. After the cable head is wrapped, most of the doors are not closed, sometimes the cable is not long enough, and the joint production does not meet the requirements. This is also the reason for failure.